So I am fearful I don't have anything but negative information in your case, sorry! Don’t quit although, the online world is an excellent issue!!
We don’t truly know if an Convey shares areas having a C1500. Before the front ends ended up commonly a similar as well as rear end experienced distinctive parts.
While using the element you have installed you should not have damaging camber, and so they alignment must not alter on you. Also try to be Just about degree backward and forward, not a one.
You're welcome to return from the manufacturing unit! We don’t have an installation Section though. We do many of the R&D perform right here and Create many of the parts below but we don’t have any assignments going on to have a look at, sorry about that.
haha. Sad to say this truck is undoubtedly an eight lug, if it had been a 6 lug I might have already got gotten this hammered out. I assume back into the drafting board!! I really don’t want to purchase a package and it not get the job done then be caught with it! Thanks for the assistance!!
examining on lowering springs and a few say the ride are going to be inventory or greater and a few say the journey will likely be like Using inside of a logging truck then there was the shocks concern new excellent shocks are about 60% less then 2in drop shocks just after examining the spec identified the next inventory shock Extended Size:thirteen.
The kit will in shape only In case you have a 5-lug wheel pattern. You'll have an eight-lug wheel sample which is has one-ton suspension pieces. Our sections only work on the fifty percent ton platform!
Looking to buy the Complete DJM Reducing Kit DJM2057-5/7 for my 1996 Chevy 3500 with an ext taxi. Query. Is that this all I will require,(pieces intelligent)(I do know you need shocks in addition if you want this one to do accurately) the rest. What else am i able to hope to obtain to carry out. I listen to about notching the frame.
It seems like the A-arms are a great way to go but what springs do you recomment? Or would the spindles be a far better guess Together with the springs which can be inside the truck now?
The supplied grease fittings fit in the Handle arms, but will not fit in the ball joints. Are definitely the ball joint grease fittings a distinct measurement? In addition to that, I was shorted a person grease fitting.
I woundering If you're able to aid. I’m following lowering ibeams for your 81 f100. Do you have kits out there.
We don’t have substitute bushings for your swaybar, but I do think you will find them at Prothane, they make substitution urethane areas for almost every thing! Good luck and let me know if that worked for yourself!!
Should you have a 2″ block beneath the leaf spring on top of the axle so you clear away it you'll drop the rear two″ and do the same matter as setting up a reducing shackle.
In case your beams are equal length possibly? I'm able to’t tell you of course. A great deal of fellas have thought about what your considering but I haven’t talked to anyone who has made it perform. That’s not to state it may possibly’t be carried out, just don’t want to give you negative advise.